4. SC-TD08 Stirling Cooler TD08

SC-TD08 Stirling Cooler TD08

Standard cooler
For flexible install cooler and driver board to your system

SC-TD08 Stirling Cooler TD08

Key Features

Achieve 25 watts of cooling capacity at -80℃

  • The SC - UD 08 is a standard cooler, which is suitable for strict temperature control below - 80 ° C. Depending on the heat mass and temperature of object, cooling capacity and speed can be fine-tuned.

Compact and lightweight standard type

  • SC-UD08 can be installed on various applications, especially for portable type equipment because of its compactness and lightweight.

Cooler and Drive board are separated (no Fan)

  • For customers who think more compact equipment design, cooler and driver board are separated. The suitable fan is required to be installed for exhaust heat management, as the same with SC-UD08.

  • 画像
  • 画像
  • 画像
  • 画像
  • 画像

Typical performance

画像

This cooling curve is the typical characteristic at no load, not guaranteed value. Note that cooling performance depends on each design of cooling system strongly.　Referring user's manual at our web-site, and confirm if our products are suitable for your use.

Ask Question

Your Industries

Accurate ultra-low temperature

FPSC accurate ultra-low temperature supports professional applications such as temperature calibration and inspection of electronic components.

画像

CASE2 :

Condense

Condensing gases at ultra-low temperature enable to improve environmental measurement and semiconductor process.

画像
Your Industries
Products

FPSC

– State of the Art

FPSC, Free Piston Stirling Coolers, are the complete CFC free system, using natural He gas.
It is small, portable, and it is widely used for precise temperature control for under -50℃.
Twinbird succeeded in mass production through the collaborative network of craftsmanship in Tsubame-Sanjo.

  • Below -50 ℃

    suitable for cooling below -50℃. *1

  • Less than 10 min.

    Reach to -80 ℃ in a few minutes. *1

  • Under +/- 0.1 ℃

    Precise temperature control system. *1

  • Less than 3 liters

    Total volume of cooler is less than 3 liters *2

  • degrees CFC free

    Zero Global Warming Potential He gas is used for refrigerants to reduce environmental load.

  • Tsubame-Sanjo

    FPSC based on the network of craftsmanship in Tsubame-Sanjo

*1：　Optimum thermal insulation design for relatively small thermal mass is required.
*2：　In case of model SC-TD08

Specifications

Dimensions W H L: 130 x 130 x 280 (mm)
Weight 2.5 kg
Power Source Voltage DC 24 Volts
Maximum Current 10 Amp
Cooling Capacity 25 Watts at -80℃ at cooling head (ambient temp: 25℃)
Ambient Temp in Operation 0℃～35℃
Set Temp of Cooling head -20℃ or less
Noise 50 dB(A) (Horizontally 1 m from Cooler, after stable operation)
Include Driver Board
Accessory SC-CA04 Cold Side Adapter
Sample Price 1,050 USD (ex. Work, Shipping fee is not included)

Documents

If you would like to see the instruction manual of this model please download the document from here.

Brochure
User’s Manual
External Drawings
Warning and Caution
Typical Cooling System